Q
How to make a basketball court
A

Hangzhou Green Field Rubber share you how to make a basketball court


 Step1

Calculate the measurements of the basketball court. Determine if the available area can fit a half-size or full-size court

The size of a regulation NBA and NCAA basketball courts are 94 feet by 50 feet (28.6 m by 15.24 m). The size of most high school basketball courts is 84 feet by 50 feet (25.6 m by 15.24 m). For half-court dimensions, divide the length and width by 2.


Step2

Purchase 2 basketball pole hoops for a full court and  dig a hole for the basketball pole with a shovel( at least 15 inches deep


Step3

Level your playing surface. Remove everything but dirt from the staked-out area


Step4

Set up and pour the concrete for the court surface. Make sure the weather is dry before performing this step. Once the concrete has been poured, you will need to wait at least 36 hours before utilizing the court.Pole hoops will need to be installed during the concrete pouring step. Each pole must be placed 1 to 2 feet (30.48 to 60.96 cm) into the ground and stabilized with concrete. Regulation height for basketball hoops is 10 feet (3 m) from the ground to the top of the rim.


Step5

Paint the lines on your court.

The out-of-bounds line should be 2 to 3 inches (5.08 to 7.62 cm) thick surrounding the entire court.

The centerline runs horizontally from one side to the other directly in the middle of the court.

The free-throw line is exactly 15 feet (4.57 m) from the hoop and 12 feet (3.65 m) long.The free-throw lane is 12 feet by 19 feet (the top of the box is the free-thro


Step6

Paint the rest of the lines. These are the 3-point arc, the center circle and the boxes.



 

Next:How to install rubber tiles?